I am selling a very well maintained Enduro that has not been ridden much. Brakes have been completely replaced with higher quality ones at a specialist dealer. Selling due to relocation and because it is not my main bike, I used it as a backup bike. No garage or cellar location, the bike was always inside the living room.
Technical specifications
FRAME
M5 alloy, fully machined frame with ORE TT/DT, tapered and forged HT, ISCG mount, sealed cartridge bearing pivots, replaceable derailleur hanger, 160 mm travel
HEADSET
1-1/8 and 1.5" threadless Campy-style headset with 1.5" inch cartridge bearing at the bottom
SEAT BINDERS
34.9 mm clamp ID, hard anodized 7050 alloy collar with QR, black
REAR SHOCK
Fox RP23 with Boost Valve, rebound and separate climb adjustment and individual 3-position low-speed comp adj., 8.5 x 2.125 inch
FORK
Fox 36 Float R, air spring, tapered aluminum steerer tube, shock adjustment, 20 mm thru-axle, 160 mm
RIM
Roval Traverse AL, aluminum disc, 26 mm, 27/32 hours
FRONT HUB
Roval Traverse AL, alloy, 20 mm thru axle, 27 hours
REAR HUB
Roval Traverse AL, QR, 32h
SPOKES
DT Swiss Competition 1.8/1.6 mm stainless steel
FRONT WHEEL
Specialized Clutch Control, 60 TPI, 2Bliss-capable aramid bead, dual compound, 26 x 2.3 inch
REAR WHEEL
Purgatory Control, 60 TPI, 2Bliss-capable aramid bead, dual compound, 26 x 2.2 inch
INNER TUBES
Ultralight Presta valve
DRIVE
Front derailleur
SRAM X.7, 10-speed, S1 direct mount for DMD, bottom pull
SHIFTER
SRAM X.0, 10 speeds, center cage
SHIFT LEVER
SRAM X.9, 10-speed, aluminum trigger
CASSETTE
Shimano HG81, 10-speed, 11-36 teeth
CHAIN
KMC X10, 10 gears, with reusable missing link, nickel plates
CYCLES
Custom SRAM Carbon S-2200, 10-speed AM double derailleur, GXP spindle, removable spider, Gamut Shift Guide, S: 170 mm, others: 175 mm
CHAINBOARDS
36A x 24A, 4-hole, 104/64mm
Bottom bracket
SRAM GXP, bottom bracket
SADDLE POST
Specialized command post, 3 positions, 125 mm height-adjustable with air spring, remote-controlled, single bolt head
BARS
Specialized XC, 3D forged alloy, 4 bolts, 31.8 mm clamp, adjustable rise
HANDLEBARS
Specialized Enduro low-rise bars, 7050 alloy, 720 mm wide, 8 degrees backsweep, 6 degrees up, 31.8 mm
GRIPS
Specialized Lock-on, S/M: Grappler, Others: Rocca
SADDLE
Specialized BG Henge Comp, hollow Cr-Mo rails, 143 mm width
exchanged for "SQ Lab 610"
BRAKES
FRONT BRAKE
Custom Avid Elixir CR SL, hydraulic disc, tool-free pad contact and reach adjustment, semi-metallic pads with alloy backing, stainless hardware, 203 mm rotor
Rear brake
Custom Avid Elixir CR SL, hydraulic disc, tool-free pad contact and reach adjustment, semi-metallic pads with alloy backing, stainless steel hardware, 185 mm rotor
BRAKE LEVER
Custom Avid Elixir CR SL, hydraulic disc brake, tool-free reach and pad contact adjustment, alloy lever blade
completely replaced front and rear with "Magura MT 7 "