New frame in opened box
Fits 700c gravel, cross and road tires from 28-40mm wide
Bottom bracket standard: BB386EVO pressfit 86.5x46mm BB shell
Cranks: fits all Shimano road cranks and all SRAM DUB road, Force 1 BB30
Front derailleur mount: bolt-on, removable
Recommended ring shape: flat (e.g. Wolftooth)
Maximum 1x ring size (general guidance): 50t (flat ring, not available in all sizes with all BCDs so check with your crank supplier); 46t (SRAM offset ring). Note: clearance depends on chainline & chainring. 2mm space is required so please verify.
Maximum 2x ring size: clearance depends on crank & chainring model. 2mm space is required. For most current generation cranks, the following applies: 50t (outer ring), 36t (inner ring)
Rear thru-axle: 142x12mm superlight Carbon-Ti X-12
Front thru-axle: 100x12mm superlight Carbon-Ti X-12
Front disc rotor size: 160mm only
Front brake caliper mount: Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors
Front brake bolts SRAM: 37mm “REAR” brake bolts for 30mm “chainstay” (SRAM part# 00.5318.005.008)
Front brake bolts Shimano: 43.2mm “REAR” brake bolts for 30mm “chainstay” (Shimano part# Y8N208030)
Front brake set-up Campagnolo: “140mm” (rear) caliper + 160mm rotor, no adaptors, 2x39mm "screws for 30-34 mm rear mount thickness” (Campagnolo part# AC18-DBSC39)
Rear disc rotor size: 140mm or 160mm
Rear brake 140mm mount: direct mount
Rear brake 160mm mount: use adaptor for SRAM (00.5318.018.001) or Shimano (ISMMAR160DDA)
Rear brake bolts SRAM (140mm & 160mm disc): 2x 27mm (SRAM part# 00.5318.005.004)
Rear brake bolts Shimano (140mm & 160mm disc): 2x33.2mm (Shimano part# Y8N208010)
Rear brake set-up Campagnolo: “140mm” (rear) caliper + 140mm rotor (no adaptor) OR 160mm rotor + rear adaptor, 2x29mm “screw for 20-24 mm rear mount thickness” (part# AC18-DBSC29)
MultiStop internal system: 1x & 2x mechanical, Di2, eTap (eTap only included in U.P.P.E.R. frameset)
Headset: Integrated IS42/28.6 | IS52/40 with 45x45 degree lower bearing). For example Cane Creek BAA1161 + BAA1131, Chris King DropSet 2 or Token Omega A83
Seatpost: 27.2mm diameter, standard set-up zero-offset
Fenders: compatible with clip-on style fenders
Cage mounts: seat tube, down tube, under down tube
TT bag mount system: 100mm front-post-to-headset-edge
Max. weight (total rider+luggage): 120kg / 264 lbs (EN/ISO/internal test standard)
RTP( Ready-to-paint): a clearcoat is not needed for UV protection but recommended to protect against scratches and wear
Included: headset, seattube collar, thru-axles, 2 RD hangers, 1 FD mount, cover bolts for FD mount posts, 4 MultiStops (2x, 1x, Di2, eTap), cable exit stop, BB guide, cable liners, noise-reduction foam sleeves, bottle cage bolts, manual