I bought the bike as a reserve this spring 2024, invoice from March 2024 is available. The bike was only in my room and has 0.0 km. The dealer invoice is from March 2024 so the bike still has a remaining warranty from the dealer or from Cube.
I checked everything again after purchase and fine-tuned everything. For example, I swapped the original stem for a better Ritchey WCS 110mm 6/84 degree. Handlebars, seat post and stem also supplemented with special carbon paste so that everything sits cleaner and does not make any squeaking noises. I also fine-tuned and readjusted the gears.
I changed the tires to 35mm Pirelli, see pictures. I changed the inner tube to Schwalbe Extralight, as the original Aerothan tubes, especially the valve, are too sensitive.
I fitted two Elite Carbon bottle cages. I sealed all screw openings where extras can be mounted with black anodized screws.
A matching set of new eggbeater 3 red anodized pedals is also sold and is part of the scope of delivery.
I have attached cable ties to the pedal thread on both cranks during shipping. I do this because a washer must be fitted to the cranks before the pedals are fitted. These washers are attached to the cranks and I have secured them with two cable ties so that they don't get lost.
The bike is certainly in better condition than if you bought it from a mail order company. The frame size is XL / 61, which means the most important dimensions of the frame are: Seat tube 544mm, top tube horizontal 592mm, head tube 197mm, reach 402mm, stack 623mm, seat post length 350mm, crank length 175mm, stem length 110mm, handlebar width 460mm.
SRAM battery charger is also included in the delivery and a battery is installed on the rear derailleur.
You can find the rest of the data on the cube homepage, just look for the NUROAD C:62
SLT on the homepage, there you will find all other data.