Tannenwald Custom Bikepacking MTB
Consists of a handmade steel frame from Tannenwald Radmanufaktur in the Palatinate. Based on the Luchs model
Frame material: Steel - Columbus Zona - Max
Wheel size: 29'
Maximum tire size: 60 - 622
Bottom bracket: BSA 73 mm
Dropouts: 12 x 148 mm (Boost) / M12 x 1.0 thread
Drivetrain: 1 x 11-speed and 1 x 12-speed derailleur gears
Seat post: 27.2
Head tube/headset: 44 mm headset
Brake system: International Standard
The frame contains a custom-made frame bag from Gramm Tourpacking. This is bolted into the frame, no straps.
Three mounting points under the down tube for an additional bottle or cage. M5 thread for water bottle on both seat stays.
Bolt-on option for light on one of the seat stays with 3D printed holder for Son rear light. Of course you can also attach other lights there. At the height of the axle at the rear there are threads for luggage racks, bolts or direct luggage rack attachment (e.g. Tailfin).
Cane Creek headset
The frame was manufactured at Tannenwald at the beginning of 2023 and then built up and used for Candy B Gravel and Tuscany Trail and a few local tours max 2000km. Then all attachments were removed and used elsewhere.
Now rebuilt as a complete bike.
Almost all attachments are new or taken over as new parts from another bike. see text
The invoice for the frame is of course available for some of the components such as the suspension fork.
SRAM DUB bottom bracket - new
SRAM DUB crank 32 teeth - new
SRAM GX gears 10-52 - taken over from the new bike
SRAM 10-52 cassette - as good as new (400km)
Rockshox Judy Silver Air TK 100mm RL - NEW
SRAM Code Silver Stealth 4 piston brakes - NEW
Brake rotors - 160mm/180mm - taken from the other bike
Slowbuild custom 29er wheelset 30mm internal width, DT Swiss hubs 370 EXP converted to 36 T - New
Maxis 29*2,35 Forekaster - taken over from the other bike approx. 400km run
SRAM GX chain degreased and waxed - NEW
SQLab 30x handlebars - taken over from the other bike
EC90 Carbon seatpost -New
EC 90 saddle - new
NO Name 80mm stem - taken from the other bike
The suspension fork is not shortened, so the buyer can customize it for himself. ( and therefore the spacer tower)
Size M/L
The frame is powder coated
In some places a protective film is glued