Kurzfassung:
- elektrische Schaltung - SRAM 12 Gänge
- konfiguriert als Endurance Bike (Reifenwechsel für Gravel)
- guter Alu-LRS mit Ratchet System von DT Swiss
- selbst aufgebaut und regelmäßig gewartet
- einwandfreier Zustand
- tubeless
- Kettenwachs
- für Personen ab 188cm Größe
- Powermeter in der Kurbelgarnitur
- hat rund 5000€ gekostet (2,8 nur für den Rahmen)
Letzte Wartungsarbeiten:
- Laufräder zentriert
- Lager in den Naben auf Beschädigung geprüft und neu gefettet
- Kette neu gewachst
- Felgenband und Dichtmilch erneuert
- Bremsen entlüftet
- Steuersatz demontiert, gereinigt und Lager neu gefettet
- Freilaufkörper gereinigt und neu gefettet
- Fahrrad gesäubert
Nachdem ich bereits sukzessive damit begonnen hatte meine Räder selbst in Stand zu halten und bei Bedarf anzupassen habe ich letztes Jahr auch ein eigenes Rad aufgebaut. Dieses möchte ich jetzt verkaufen, weil ich immer weniger Zeit finde mit dem Rennrad zu fahren und noch 2 andere habe. Ich bin mit dem Rad eigentlich nie Gravel gefahren, sondern immer nur auf der Straße und vor allem in den Wintermonaten, weil die Bereifung besser passt.
Das Rad war ein Jahr in aktiver Nutzung, ist aber noch in sehr gutem Zustand. Ich habe mich mit dem Rad dazu entschieden Wachs anstatt Öl für die Kette zu nutzen, was schonender für den Antrieb ist. Außerdem läuft er deutlich besser und setzt kaum Dreck an. Die Kette habe ich im Mai 24 das letzte Mal neu gewachst (hält ca 1000km, danach muss man die Prozedur wiederholen, oder mit Flüssigwachs von Optimize arbeiten)
Beim Cockpit habe ich mich für Force Hebel entschieden, weil mir diese von der Größe besser gefallen. Generell sind Force, Rival und Red bei dem Rad gemischt, das ist vom Hersteller auch so vorgesehen. Bei jedem Teil habe ich vorher die Kompatibilität geprüft.
Die Sattelstütze ist eine Besonderheit, weil aus Titan. Ich mochte die Optik und in Kombination mit der Rahmeneigenen Federung ist der Fahrkomfort sehr gut. Außerdem habe ich die Reifen auf Tubeless umgestellt, was ebenfalls zum Fahrkomfort beiträgt, weil der Druck niedriger sein kann.
Beim Zusammenbau habe ich mich immer an die Drehmomentangaben der einzelnen Hersteller gehalten. Auf dem Rahmen klebt Schutzfolie. Auf dem Oberrohr kann man das deutlich sehen.
Die genaue Teileliste findet ihr unter den Bildern. Bitte beachtet, dass die beiden Lichter vorne und hinten sowie die Computerhalterung nicht inbegriffen sind.
Der Verkauf erfolgt unter Ausschluss jeglicher Gewährleistung.