No seatpost included.

This was my personal road bike frame that I treated myself to after decades of racing. This frame was never raced or dropped. There are some minor chain scrapes on the drive side BB shell. The paint is in great shape. Never repaired.

This is a rim brake frame that uses a standard fork mount rim brake front caliper, and a direct mount under the chainstay rim brake rear caliper. Please see my other listings for a great rear direct mount Dura-Ace 9100 brake which fits this frame. These brakes are NOT INCLUDED in this sale.

This frame was set up for Shimano Dura-Ace 9100 Di2, however the OEM Felt bottom bracket and downtube cable guides, as well as the seat stay grommet, are included which should enable it to run a mechanical groupset. There is 60mm of steerer above the head tube. The Cane Creek internal headset bearings were replaced 2 years ago, with little use on them. The bottom bracket is a Wheels Manufacturing screw-in BB386 Enduro bearing sealed unit, set up for 24mm Shimano cranks, which has been serviced.

Included are:

Di2 wire grommets

Mechanical downtube and bottom bracket cable guides, and seat stay cable grommet

Low profile headset cap with carbon headset spacer (aftermarket)

OEM Felt carbon headset cap

OEM Felt front fork brake affixing nut

Internal headset expander

OEM Felt carbon steerer top cap with Felt adjusting bolt

Wheels Manufacturing bottom bracket

OEM Felt seatpost clamp

Water bottle bolts (2 sets)

Owner's manual

This frame will be adequately wrapped and boxed for shipping.